Відео

@@slo6026 no I haven’t.

@@robertmitchell3030 would love to see a video on how. It’s probly just a matter of the thickness of the sleeves.

It’s the same as the base game in that you can still only recruit a maximum of 2. Whether it’s one naval and one land, or 2 naval, or 2 land. Keep in mind naval can only go to port city regions you have. However as far as movement goes, you can move up to all your units one time. So if you have 3 naval, and 5 land units, you could pay to move all of them one time each. Keep in mind land units can only go to adjacent lands, but naval units can go anywhere. But you only get the trade goods for naval units when you recruit them, not when you move them.

The Etsy link is in my description. You could probly write the designer of it and ask.

I completely agree. Especially for something so simple.

Yea the reduction is permanent. The only way to get extra supporters is from forging on your player board. But any reduction, those stay in the box the whole game.

@@KMReviews thank you very much! :)

I really enjoyed my plays so far!

I agree since sleeves can vary with thickness. But I’m more disappointed with it not fitting the tokens the way they should.

@@KMReviews Swapped my Sleeve Kings 100 micron for some random sleeves I had on hand and got them to fit ok. I'm assuming they may have been 60 microns instead of 100. Also the FFG style of the 100 micron sleeves were too tall anyway for both the original tray and the new tray anyway. Sad we can't seem to get more creators supporting the "FFG" sleeve standard of the years of yore, especially since Sleeve Kings took the standard over. Yes I agree with the tokens being weird in the way they have to lay at an angle. I think my largest concern though is that the tray itself will just succumb to the weight of everything inside in no time flat through normal wear and tear. Then what the heck am I'm going to do if this thing is in shambles? Looking forward to someone printing a 3d solution for this that can slide into the original box that is more sturdy. I don't expect a 3rd party solution to be able to support 100 micron premium sleeves (whether FFG standard or not). Doesn't seem like there is enough room for that redesign but I could be wrong. The 3d designers out there are amazing in their customization.

Honestly I feel the same way. With HUGE decks sleeving can make shuffling easier the way they slide together. But when I first got into gaming I was convinced sleeving was necessary because I knew a guy who would play trick taking games and knew what every card was based on every little ding. I’ve learned over time that was a rarety and I’ve slowly desleeved my games. I agree it’s way too expensive for what it does. That’s why I desleeved this one too lol. Now I have a ton of extra

@@KMReviews Yah I think I went through the same path. Thought sleeving was a must. Also when you start getting into board games you have this illusion youll play a game dozens of times but then you quickly realize that in reality, you end up playing the vast majority of games only a few times because you might, like me get many games lol But yah, I guess there are exceptions...if you know your favorite game youll play a TONS and its out of print, I suppose it may be worth it but this should be the exception.

@@rb4551 yes I have so many I’m Lucky if I play a game once a year lol

A Foundations of Rome-related video might not be the BEST example of your "rebuy the game and still be ahead" philosophy. 😂But even a deck builder with 300 cards is what, 6 packs of under $4 Gamegenic sleeves? If they're standard card size sleeves, you can even get the bulk 200 ct sleeves for around $9 from Game Nerdz. Something like Splendor, which is easily replaced, I don't sleeve, but I do sleeve pretty much everything else. And it isn't even so much protection, it is about the infinitely more satisfying shuffling with sleeved cards. 🤩

@@RickKoeppen If you play a game very often and you shuffle a lot, its totally worth it. For 99.99999% of people, its not worth it because we dont play game nearly as often as we should to make it worthwhile. But at the end of the day, its your money and your life so whatever makes you happy. Id rather save the money since the hobby is expensive enough as is.

They are only Egyptian if you choose Egypt as your national military power lol

@@KMReviews Oh! :-D Thanks!

Yea I don’t blame ya. You could just keep some stuff sleeved and not others. Like don’t sleeve the solo cards, and don’t sleeve the objective cards, etc. make it work in other ways.

Yea if you don’t sleeve absolutely every card you will be fine. Or if you don’t have the solo cards they will probly fit too. This was to show for the people who want to sleeve every single card because they advertised all sleeved cards would fit.

@@KMReviews yeah Even if I sleeve a lot of my games I don't demand inserts to take it into consideration. But since they said in a video that it fits it does cause some irritation

You fit the solo cards and everything too?

@@KMReviews I do not have the solo expansion. But where you put them in your insert I just put other bits. All my cards are sleeved in the 3 card bins. The larger cardboard pieces are weird that they did not make the one side section just a tiny bigger. I also have all cardboard money as well and still had space.

@@MerrillWhiteKalEl well that makes sense why yours fits sleeved cards then. I was pointing out if you have everything it Doenst fit sleeved cards. But I’ll live, I unsleeved everything and it fits fine.

Now I do have thick sleeves because I use dragon shield ones. Also if you don’t use the solo cards, you may be able to get close.. but it’s really annoying to me that those big tokens don’t fit in that tray with the others by millimeters. I tho k they could have adjusted a few things. But I think this is why there’s no official video showing it with sleeved cards. In the Kickstarter update he just says “I tested it with sleeved cards and it fits” but they won’t show that lol.

Watched a play through with the designer on dice tower.

You are welcome!

It’s very different than prelude. It definitely kickstarts your game a little and gives some assymetry right off the bat which for me makes it more fun, but it by no means speeds up the game. I will always use them now though.

+1

Which military card? Do you mean the one that replaces the spot on the board? That’s different than the actual cards.

@@KMReviews yes, the one to the right of the holding area.

@@stevekingswell9143 there’s nothing wrong or incorrect about that card so I’m not sure what you mean.

Hahaha. Well now I’m producing and acting in an action movie lol. Slow steady steps lol. Even this video is 3 years old lol

Dude congrats!!! Just subbed so I’ll def keep up with your work. Excited for you! Keep it up!!

Definitely beats flying everyday lol

I definitely suggest using things like the base rings and leader dice for any game. It just makes the board state easier to see. I also 100% think I’ll draft the starting wonderlandian and resources for every game now, at least for people who have played before. As far as the alternate wonderlandian cards, I may do that here and there but I still prefer the base wonderlandians.

@@KMReviews I can definitely see how the rings would be helpful. Drafting sounds like it would be a cool way to start as well, though I really just need more plays... Thanks for the info!

That's exactly what I would do, if I will ever get the game that is 😅

Also props for getting the colors right on the trays!

I think in 90% of my games that’s what I’m going to be using.

It’s just an expansion, you should definitely not get rid of the originals.. it just means replace them in the games you use them in.. any particular game you either use the share wonderlandians or the normal ones. So I don’t understand why you would discard the original cards..

Thanks for the insights. That said if you decide to always play with the Shards then you would have no reason to keep the originals and as it happens the deluxe box really doesn't offer immediate storage room for them other than tucking them under in deep storage. However, I do now see the desire to at least sleeve the whole set even if I've made it somewhat difficult to get to the originals. I am not sure though if keeping the extra set under that bottom insert would actually support them being sleeved (doubles their space required essentially). I might manage it if they are spread thinly on the bottom layer. For whatever its worth I noticed on BGG that I'm not the only one that interpreted this as full out right replacement instead of incorporation. Someone on bgg suggested putting both matching cards in the same sleeve and randomizing which facing is "up". That obviously doesn't help with the promos situation. @@KMReviews

@@sidneyleejohnson ok.. well it doesn’t just outright replace them. It specifically says in the instructions that all the stuff in the expansion is optional lol

Of course. Glad we discussed this here to help others clear this up as well. Thanks again.@@KMReviews

I have the deluxe copy

oh man@@KMReviews

@@constChg the insert I have is made for the retail version

I painted them myself lol

Yea they are fulfilling the Kickstarter right now.

Yea it definitely would still fit. I kinda wish I had kept mine. This works but if you have a paint job you wanna protect, keeping that portion would be a good idea.

Thank you for that. I just ordered the same insert as you. I love this game, but the setup and teardown are a bear without an insert.@@KMReviews

Blood on the clocktower? It’s a social deduction game for 7-20 players lol. You can UA-cam it. It’s really fun.

Thanks haha

Haha that’s awesome lol. I already forgot everything about it!

No I didn’t cut anything off. They fit fine. Did you get the colossal edition? That’s the one I have.

Yes. I got the Colossus game and the xl player boards from the first Kickstarter. Perhaps they changed the size of the boards to fit the Colossus box for the expansion kickstarter?

@@christianibsen1994 I believe they are all the same. If I was you I would take a video or picture proof and email them to get new ones.

A lot of the backers from the first KS had the same issue. That's why I was so surprised to see that yours fit in the box. I think I will try and cut a bit off mine myself, and see if I can make them fit. 😊 I saw a video of a guy unboxing the Sphinx expansion, and he got an updated scorepad. It looks like they did not include that in the Colossus expansion. ☹️ Have you had issues with creases in your playmat?

@@christianibsen1994 I did have issues with the playmat. But when they did the second Kickstarter they offered anyone with those issues a new one they rolled instead folded. I also got a second set of XL player boards for free because my first set was slightly warped. You can get new ones man. You just have to write them.

Oh good lol